Dancing makes a great demand to perform incredibly. The main thing to put a soul in your dance is a good pair of shoes. These shoes which you are using for dancing are not regular wearing shoes but you wear the best shoes for dancing.

These dancing shoes provide you elegant look which attracts the audience, great support, and comfortable dancing. If you are wearing shoes that are not slippery on the floor and create many difficulties and ruin your performance, you need to make them slippery.

How can make shoes slippery for dancing? It’s not a big issue we will share with you a proper guide where is more than one method for making them slippery and helps you in making your dancing moves best.

Make sure to avoid walking in slick footwear since you can easily slip, tumble, and harm yourself. The technique for repairing and eliminating the slippery component takes just a few minutes.

Quick vs Slow Shoes

When did you say you needed a set of sneakers fast? And when do they become sluggish? Dancers help these expressions to indicate how slippery their sneakers are.

Sneakers can be regarded as quickly if they are slick and slide effortlessly over the dance surface without encountering too much friction from the surface. Slow sneakers, on the other hand, are those that do not move normally and require greater steps to tackle resistance.

If you want, you can switch from slow to fast footwear. To prevent it from falling as a dancer, keep in mind you know how to move on the quick dance ground with quick sneakers. While still studying to take a step on the surface rapidly, you might like to remain with the momentary slow sneakers.

Methods

Putting Suede Soles On

These are the exterior bottoms that are offered separately in retailers. They are developed to ensure your non-slip sneakers are less sticky, allowing you to dance in them.

Suede bottoms are available as a whole sneaker block, a front bottom section, or in two parts, the forefoot, which covers the toe box and base of the foot, and the heel suede component.

If your sneaker has a heel, just a small one, the two parts will suffice. The front section of a bigger stiletto dancing sneaker will suffice. A block bottom will suffice for the flat running shoes.

Furthermore, the bottoms might be actual genuine foot sizes or blocks from which you must trim out your sneaker size. Suppose you began with the block’s suede bottom in this case.

Procedure:

1st Step: Draw a line across the sole of your sneaker and measure the size. To ensure an optimal fit, use the dimensions to precisely trim the bottom. If you’re going to wear it with heels, you can trim the front part.

2nd Step: Raise your sneaker horizontally so that the bottom is exposed and accessible.

The suede adheres effectively, so you won’t have shoe concerns about the bottom slipping off when shuffle dance or other sports. It will never be a source of shame, particularly if it is made of high-quality suede.

3rd Step: Continue the method each time you need to change the suede. Have excitement on the dance stage with your stylish athletic sneakers.

Making Use of Sandpaper

Do you like to have a faster, less costly, and more convenient approach to make sneakers slippery for dancing? Why not try the following method utilizing sandpaper? Nonetheless, this procedure works best on rubber soles.

1st Step: Get some rough sandpaper since you’ll be removing patterned designs from the bottoms of your sneakers.

2nd Step: Hold your sneaker from the inside with your hand.  Scrub your sneaker bottom with the sandpaper in rough flowing movements. Begin from one border, such as the heel or toe box. Before proceeding, be certain that you have completed effective work.

3rd Step: After your footwear has softened, soak a small cloth in olive oil. Wipe the sandpaper remnants from your bottom using it. Wash away extra oil to avoid slipping and falls.

This process will improve the already soft quality of your bottom.

4th Step: Your rubber-soled sneakers are suitable for a dancing surface.

Apply Gaffer Tape

You may also apply gaffer tape to keep your dance sneakers slippery. Gaffer tape is a cloth-like fabric with an adhesive backing that left no remnant when erased.

1st Step: With one hand, hold your shoe and the gaffer tape. This will be difficult since you will require to trim the adhesive periodically for a proper fit. In any case, you can even do it. 

2nd Step: Use cutters to cut the adhesive anytime you reach a shoe edge.

3rd Step: With your usual non-dancing footwear, visit any dance surface, whether it’s hardwood, plastic, concrete, or any other.

Making Use of Moleskin

Moleskin is a velvety cloth with an epoxy adhesive on one side and a sensed sensation on the other. The sticky coating may be pulled off and placed on any section of your footwear that doesn’t have a good grip on the ground.

The best areas to apply moleskin are at the front of your footwear, along either part of your arch, just behind the heel, so there’s no space between moleskin and ground and on either end of where your wide toe would be if these boots were conventional socks.

Apply Cooking Oil

Applying cooking oil, such as Canola oil, to render your footwear more slippery is an efficient method. Its waxy process makes it glide effortlessly across floors without clinging, which is quite comparable to the experience of using completely new sneakers that have not yet been coated with waxes or silicone sprays.

Clean the bottoms of your left and right shoes with a clean towel dipped in a sufficient amount of frying fat.

Make use of Baby Powder

Due to sweatiness, your sneakers may start smelling rather bad after performing in them for an extended amount of time. Put the baby powder in a zigzag manner over the bottoms of your shoes, then press that region with your hand to assist disseminate it uniformly around the bottom.

Adidas Shoes: Read Guide Here.

Baby powder not only removes perspiration spots from the bottom of your sneaker soles but also gives excellent hold since it acts as both a lubricant and a grip ingredient. This implies that when you dance in your freshly powdered sneakers, you will experience significantly less resistance from the ground.

Having Your Sneakers Waxed by a Cobbler

Cobbler’s wax is commonly accessible in practically every footwear shop throughout the world. They also do it when clients send in their sneakers for maintenance or resoling since it increases the endurance of leather by maintaining it flexible and keeping the area more liquid-resistant.

The cobbler will apply a coat of cobbler’s wax to the bottoms of your leather sneakers and then polish the area to give it a good sparkle. The number of layers of wax you apply depends on how slippery you want them to be and how long you want them to remain in place.

Three layers should be plenty for most dancers who want extra hold when attending a class or public dancing, however, those who simply practice at home on occasion may need more layers for a harder hold.

Conclusion

Knowing how can make shoes slippery for dancing makes enjoyable your dance moves for you. You can dance in every type of shoes by making them slippery if they are not at the start. Utilizing readily accessible ingredients and easy processes, you may turn footwear slippery for shuffling or dancing.

Some surgeries are not recoverable. If you chose them, be confident you won’t require them for anything other than dance and moving. Slippery sneakers might lead you to trip and fall, injuring yourself.

You can use Suede sole, gaffer tape, cobbler’s wax, and more methods to turn your shoes in a slipping manner for performing in the best way.

Frequently Asked Questions

What are the finest dance sneakers?

The shoes which slipping quality, supportive, comfortable, lightweight, and shock absorber are the best shoes for dancing. If you are buying non-slip shoes and want to make them slippery, it’s very easy to do by using any method which we are mentioned above.

How is rubber bottom slippery made?

It is easy to make rubber soles slippery by using gaffer tape, sandpaper, or any other which are mentioned above by using the procedure of applying them.

Can you dance while wearing Walking sneakers?

Walking sneakers are not good since they have a lot of grips, which is not suitable for Zumba, particularly while executing lateral movements, as you might damage yourself. By making walking shoes slippery then you can use them for dancing purposes.

Hashir
Hi, I'm Hashir. I really like to dress well in awesome shoes. I working in the shoe industry for more than 4 years and know well about shoes. Besides, I also like programming. So, I am sharing my experience and technical stuff in my diary.